How to Reset Schlage Keypad Lock Without Programming Code

Posted on

Are you facing difficulties resetting your Schlage keypad lock without the programming code? Don’t worry; you’re not alone. This comprehensive guide will walk you through the process step by step, providing clear instructions and helpful tips to ensure a successful reset. Whether you’ve lost the programming code or simply want to change the lock settings, this article has you covered.

Schlage is a renowned brand known for its high-quality and secure locks, and their keypad locks are no exception. However, like any electronic device, there might be times when you need to reset the lock for various reasons. This guide will specifically focus on resetting your Schlage keypad lock without the programming code, a situation that can arise due to various factors such as misplacement or forgotten codes.

Before we delve into the reset process, it’s important to gather the necessary tools and information. Make sure you have a Phillips head screwdriver, a small flathead screwdriver, and a 9-volt battery. Additionally, you’ll need the lock’s model number, which can be found on the back of the lock or in the user manual. With these items at hand, let’s get started on the reset process!

how to reset schlage keypad lock without programming code

Follow these simple steps to reset your Schlage keypad lock without the programming code:

  • Gather tools and information
  • Remove the lock’s cover
  • Locate the reset button
  • Press and hold the reset button
  • Reinstall the lock’s cover

Once you have successfully reset your lock, you can now set a new programming code and start using your keypad lock as usual.

Gather tools and information

Before you begin the reset process, it’s essential to gather the necessary tools and information. Having everything you need on hand will ensure a smooth and successful reset.

  • Phillips head screwdriver:

    This is required to remove the lock’s cover and access the reset button.

  • Small flathead screwdriver:

    This is used to press the reset button, which is typically a small, recessed button.

  • 9-volt battery:

    This is used to power the lock during the reset process.

  • Lock’s model number:

    You can find this information on the back of the lock or in the user manual. It’s important to have the correct model number to ensure you follow the appropriate reset procedure.

Once you have gathered all the necessary tools and information, you can proceed with the reset process.

Remove the lock’s cover

Once you have gathered the necessary tools and information, it’s time to remove the lock’s cover. This will allow you to access the reset button.

  • Locate the cover screws:

    Depending on your Schlage keypad lock model, there might be one or more screws securing the cover. These screws are typically located on the bottom or side of the lock.

  • Remove the cover screws:

    Using the Phillips head screwdriver, carefully remove the cover screws. Be sure to keep the screws in a safe place so you can reinstall them later.

  • Remove the cover:

    Once the screws are removed, you can gently pry off the cover. Be careful not to damage the lock or the cover.

  • Locate the reset button:

    Once the cover is removed, you should be able to see the reset button. It’s typically a small, recessed button located on the inside of the lock.

Now that you have successfully removed the lock’s cover and located the reset button, you can proceed to the next step of the reset process.

Locate the reset button

Once you have successfully removed the lock’s cover, it’s time to locate the reset button. This button is typically small and recessed, so you might need to use a flashlight to see it clearly.

The location of the reset button can vary depending on your Schlage keypad lock model. However, it’s usually found in one of the following places:

  • Inside the battery compartment: If your lock is battery-powered, the reset button might be located inside the battery compartment. To access the battery compartment, simply remove the battery cover.
  • Under the keypad: On some Schlage keypad locks, the reset button is located underneath the keypad. To access the reset button, you’ll need to remove the keypad. This can usually be done by removing a few screws.
  • On the circuit board: If you can’t find the reset button in either of the above locations, it might be located on the circuit board. To access the circuit board, you’ll need to remove the lock from the door.

Once you have located the reset button, you can proceed to the next step of the reset process.

If you’re still having trouble finding the reset button, you can consult your lock’s user manual for specific instructions.

Press and hold the reset button

Once you have located the reset button, it’s time to press and hold it. The amount of time you need to hold the button varies depending on your Schlage keypad lock model. However, it’s typically around 10-30 seconds.

While you’re holding the reset button, you might hear a beep or see the lock’s lights flashing. This is normal and indicates that the lock is resetting.

Once you have held the reset button for the required amount of time, release it. The lock should now be reset.

To verify that the lock has been successfully reset, try entering your old programming code. If the code doesn’t work, then the lock has been successfully reset.

If you’re still having trouble resetting your Schlage keypad lock, you can consult your lock’s user manual for specific instructions.

Reinstall the lock’s cover

Once you have successfully reset your Schlage keypad lock, it’s time to reinstall the lock’s cover.

  • Align the cover:

    Carefully align the lock’s cover with the lock body. Make sure that the screws holes on the cover line up with the screw holes on the lock body.

  • Replace the cover screws:

    Using the Phillips head screwdriver, replace the cover screws. Be sure to tighten the screws securely, but do not overtighten them.

  • Test the lock:

    Once the cover is reinstalled, test the lock to make sure it’s working properly. Try entering your new programming code and make sure the lock unlocks and locks as expected.

  • Clean up:

    Finally, clean up any debris or tools that you used during the reset process.

That’s it! You have now successfully reset your Schlage keypad lock without the programming code.

Leave a Reply

Your email address will not be published. Required fields are marked *